|
Your PORTABLE CHILLING SYSTEM has been carefully assembled
and engineered to give trouble free service with a minimum
of maintenance.
Your unit is self-protecting by a series of safety controls
integrated in the control system. These have been timely set
to obtain boh adequate protection and optimum efficiency from
your unit.
Water temperature is controlled by adjusting the thermostat.
Since this is sensing from the chiller vessel inlets it should
be set approximately 10° F. above desired leaving water
temperature. However, ON NO ACCOUNT
must the leaving water temperature be LOWER THAN 45°
F. unless a glycol solution is used and adjustments
are made to the controls by a qualified refrigeration serviceman.
Other than the thermostat, adjustment of controls and valves
by unqualified personnel is done at a very severe risk of
permanent damage to the unit loss of efficiency and BROKEN
WARRANTY AGREEMENT.
Before you start to install your unit, we urge you to carefully
read through and digest this literature to familiarize yourself
with its contents.
TO PREVENT PERSONAL INJURY AND/OR DAMAGE TO THE EQUIPMENT,
THIS MANUAL SHOULD BE USED FOR REFERENCE ONLY. ANY SERVICE
SHOULD BE PERFORMED BY LICENSED SERVICE PERSONNEL QUALIFIED
IN THEIR RESPECTIVE FIELDS.
|
