Locating Your Unit

3.0.0

Locating Your Unit

3.1.0

It is recommended that the unit be as close as possible to the process machinery.

3.2.0

The unit must be located inside a building that is heated during the winter months (minimum room temperature 50° F.).

3.3.0

Unit should be located on a flat level floor.

3.4.0

Since the unit is portable, clearance for service is not critical as the unit can be rolled away from obstructions for access to panels.

3.5.0

During operation, the air cooled unit must have adequate clearance around the condenser inlet for air movement and condenser outlet for hot air discharge.