|
COMPRESSOR:
|
2.5 hp "SCROLL" compressor with hot gas by-pass for capacity control.
Steps of capacity control: 100%, 50%, off.
|
|
EVAPORATOR:
|
Stainless steel braze plate 2.5 ton chiller vessel with 1" process
connections and return line "Y" strainer.
|
|
CONDENSER:
|
Air cooled with copper tube and aluminum fins with a top discharge
1/5 hp propeller fan.
|
|
TANK:
|
Stainless steel insulated tank with a water level sight gauge,
fill vent cap and drain with shut-off valve. Size 6" x 10" x 22"
high - 6.5 gallon. .
|
|
PUMP:
|
Stainless steel 3/4 hp close coupled to an ODP 3500 rpm motor with
mechanical seal. Rated at 6 gpm at 45 psi. Discharge pressure gauge
with shut-off valve.
|
|
CONTROLS:
|
Ranco solid state digital temperature controller with two (2) adjustable
outputs, refrigeration high/low pressure safety, run and fail lights,
compressor and fan motor internal overload protection in winding.
|
|
FOR FREEZE PROTECTION:
|
We use both a flow switch and a freeze thermostat.
|
|
COMPONENTRY:
|
Refrigeration expansion valve, sight glass, filter dryer, pump
down valves, liquid line solenoid, hot gas solenoid with shut-off
valve.
|
|
FRAME:
|
Rugged welded stainless steel base frame with 3 1/2" casters: two
swivel, two rigid.
|
|
SIZE:
|
28 1/4"l x 22 1/4"w x 58"h.
|
|
VOLTAGE:
|
230/1/60 only
|
|
WARRANTY:
|
5 YEAR compressor replacement warranty.
2 YEAR parts warranty on the balance of the unit.
|