|
COMPRESSOR:
|
4 hp "SCROLL" compressor with hot gas by-pass for capacity control.
Steps of capacity control: 100%, 50%, off.
|
|
EVAPORATOR:
|
Stainless steel braze plate 4 ton chiller vessel with 1" process
connections and return line "Y" strainer.
|
|
CONDENSER:
|
Air cooled with copper tube and aluminum fins with a top discharge
1/5 hp propeller fan.
|
|
TANK:
|
Galvanized steel insulated tank rated for 75 psi pressure with
a water level gauge, fill vent cap and drain with shut-off valve.
Size 12' x 12' x 24" long - 15 gallon
|
|
PUMP:
|
Stainless steel 1 hp close coupled to an ODP 3500 rpm motor with
mechanical seal. Rated at 9.6 gpm at 45 psi. Discharge pressure
gauge with shut-off valve.
|
|
CONTROLS:
|
Ranco solid state digital temperature controller with two (2) adjustable
outputs, refrigeration high/low pressure safety, run and fail lights,
compressor and fan motor internal overload protection in winding.
|
|
FOR FREEZE PROTECTION:
|
We use both a flow switch and a freeze thermostat.
|
|
COMPONENTRY:
|
Refrigeration expansion valve, sight glass, filter dryer, pump
down valves, liquid line solenoid, hot gas solenoid with shut-off
valve.
|
|
FRAME:
|
Rugged welded stainless steel base frame with 3 1/2" casters: two
swivel, two rigid.
|
|
SIZE:
|
28 1/4"l x 22 1/4"w x 58"h.
|
|
VOLTAGE:
|
208/220/1/60
|
|
WARRANTY:
|
5 YEAR compressor replacement warranty.
2 YEAR parts warranty on the balance of the unit.
|