|
COMPRESSOR:
|
Two (2) 7.5 hp "SCROLL" compressors connected in tandem with hot
gas by-pass for capacity control. Four (4) steps of capacity control:
100%, 75%, 50%, 25%, and off.
|
|
EVAPORATOR:
|
Stainless steel braze plate 15 ton chiller vessel with 2" process
connections.
|
|
CONDENSER:
|
Air cooled with copper tube and aluminum fins with a top discharge
1 hp propeller fan.
|
|
TANK:
|
Stainless steel insulated tank with water level plastic fill tube
with vent cap, side bottom drain with shut-off valve. Tank size
24" x 24" x 18" high - 45 gallon.
|
|
PUMP:
|
Stainless steel 2 hp close coupled to an ODP 3500 rpm motor with
mechanical seal. Rated at 36 gpm at 45 psi. Discharge pressure gauge
with shut-off valve and inlet "Y" strainer.
|
|
CONTROLS:
|
Honeywell solid state digital temperature controller with two (2)
adjustable outputs, refrigeration high/low pressure safety, run
and fail lights, compressor and fan motor internal overload protection
in winding, isolation pet cock.
|
|
FOR FREEZE PROTECTION:
|
We use both a flow switch and a freeze thermostat.
|
|
COMPONENTRY:
|
Refrigeration expansion valve, sight glass, filter dryer, pump
down valves, liquid line solenoid, hot gas solenoid with shut-off
valve and crankcase heater.
|
|
FRAME:
|
Rugged welded stainless steel base frame with 5" casters: two swivel,
two rigid.
|
|
SIZE:
|
88"l x 44"w x 72"h.
|
|
VOLTAGE:
|
230/460/575/3/60 and 380/3/60
|
|
WARRANTY:
|
5 YEAR compressor replacement warranty.
2 YEAR parts warranty on the balance of the unit.
|