MODEL ACP- 20T AIR COOLED PORTABLE CHILLER
CAPACITY: 18.7 tons at 50 F leaving water at 95 F plant air.

COMPRESSOR:

Two (2) 10 hp "SCROLL" compressor with cylinder unloading and hot gas by-pass for capacity control. Four (4) steps of capacity control: 100%, 75%, 50%, 25%, and off.

EVAPORATOR:

Stainless steel braze plate 20 ton chiller vessel with 2" process connections.

CONDENSER:

Air cooled with copper tube and aluminum fins with Two (2) top discharge 1 hp propeller fans.

TANK:

Stainless steel insulated tank with water level plastic fill tube with cap and vent, side bottom drain with shut-off valve. Tank size 24" x 24" x 18" high - 45 gallon.

PUMP:

Stainless steel 3hp close coupled to an ODP 3500 rpm motor with mechanical seal. Rated at 48 gpm at 45 psi. Discharge pressure gauge with shut-off valve and inlet "Y" strainer.

CONTROLS:

Honeywell solid state digital temperature controller with two (2) adjustable outputs, refrigeration high/low pressure safety, run and fail lights, compressor and fan motor internal overload protection in winding.

FOR FREEZE PROTECTION:

We use both a flow switch and a freeze thermostat.

COMPONENTRY:

Refrigeration expansion valve, sight glass, filter dryer, pump down valves, liquid line solenoid, hot gas solenoid with shut-off valve and crankcase heater.

FRAME:

Rugged welded stainless steel base frame with 5" casters: two swivel, two rigid.

SIZE:

77"l x 46"w x 78"h.

VOLTAGE:

230/460/575/3/60 and 380/3/60

WARRANTY:

5 YEAR compressor replacement warranty.
2 YEAR parts warranty on the balance of the unit.