 Chiller
Tank Sets
1st Choice Chillers manufactures chiller water tank sets
for the process cooling industry. We offer 7 standard models, each
with double pumps, baffled tank and lid. The two pump system has
one pump dedicated to the chiller or chillers to maintain constant
water flow required by the chillers to ensure maximum efficiency
and safe operation.
The second pump is dedicated to the process to supply higher flows
than the chillers would normally allow, and higher water pressure
required by the varing process equipment demand.
Click here for specifications on our Chiller
Tank Sets
Benefits of the Chiller Water Pump Tank Set
Longer Lasting: Stainless steel tank, baffles and tank lid
mounted on a rugged structural steel base that is coated with a
rust preventative paint.
Higher Operating Efficiency = Lower Operating Costs: Our
pumps generally supply the same flow and pressure as the competition
with lower horsepower motors, normallly one size smaller.
Trouble Free Operation: With TEFC pump motors, liquid tight
electrical conduit, industrial duty pumps and motor starters.
Easy to Use: Our tank set design makes it easy to install,
start up and operate.
Standard Features of the Chiller Water Tank Sets
Heavy guage stainless steel tank with 1/2" thick insulation
mounted to a structural steel welded base coated with a rust preventative
paint.
Tank complete with: Process side thermometer and brass well, pump
discharge pressure guages with brass shut-off valves, heavy-duy
bronze city water float make-up valve with bronze shut-off valve,
3" side overflow connection, and 1" side bottom drain
connection with bronze shut-off valve.
Pump trim consists of the following:
- Suction: A bronze gate valve or lever-operated butterfly
valve depending on whether the pump is threaded or has flanged
connections. Galvanized union or steel flange for pump removal.
- Discharged: A galvanized union or flange for pump removal.
Water-type check valve and a bronze ball valve or lever operated
butterfly valve. Pump dischage pressure guages with brass shut-off
valves.
- Industrial duty motor starters with thermal overloads and stop/start
push buttons are mounted to the tank and prewired to the pump
motors using liquid tight flexible conduit.
- Plant layout drawings showing customer's equipment location, cooling
equipment location, pipe runs, line sizing and electrical requirements.
- Proper water distribution is critical to system operation and
efficiency.
|
